Midland G10 Manuel d'utilisateur télécharger pdf (Page 20)

6 | Midland G10 instruction guide

Operations

Power on/oﬀ and volume adjustment

Rotate the Power/Volume knob clockwise to turn the radio on.

Rotate the control clockwise /counter-clockwise to adjust the volume le-

vel as you prefer.

To turn the radio oﬀ, rotate the control counter-clockwise till hearing a

mechanical “click”.

Transmission

To communicate, all radios in your group must be set to the same chan-

nel.

Brieﬂy press the Function key 1 to enable the Monitor feature in order

to make sure that the frequency is not busy, then press the PTT button.

For a maximum clarity, hold the device at a distance of about 4/10 cm.

Release the PTT key to receive.

Only one user at a time can talk during radio communications. Therefore, it is

important not to transmit when you are receiving a communication and use

the transmission mode sparingly to allow other users to talk.

Transmission consumes a signiﬁcant amount of energy and should therefore

be used sparingly to prolong the battery life.

If you are unable to contact a station that you have no problems in receiving,

the station may be using CTCSS tones or DCS codes.

Monitor

The Monitor feature is for excluding (opening) the Squelch, in order to

listen to signals that are too weak to keep the Squelch permanently ope-

ned.

Hold down the Function key 1 to enable such function.

Scan

This function can be activated only by means of the optional program-

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 97 98

Pas de commentaire

Midland G10 Manuel d'utilisateur Page 20